Hey Tom, so you have a couple options but most likely what you need is a 4-way to 5-way adapter like part # 20036 which will give your Ford Edge a fully functional 5-way for your boat trailer.
So the reason your boat trailer most likely has a 5-way is because it has a reverse lockout solenoid that the 5th pin of the 5-way activates to allow you to back up the trailer without locking up the brakes. This is pretty common on boat trailers but it's not always the case the 5th pin is used.... view full answer...
Hello Eric. We certainly should have hubs and brakes that you can use on your 2002 Eagle Trailer, but we do not carry any torsion axles here. We currently only deal with leaf spring axles, which do use the same hubs and brakes as the torsion axles. If you can tell me the weight capacity of the axle, I am happy to recommend parts for you. We would also need you to confirm the bearing sizes for your axle so we can make sure to get you the exact right parts.
For example the DeeMaxx Disc... view full answer...
A Tri-Ball mount like the MaxxTow # MT70021 is going to be the only style ball mounts we have with no rise. You can use the Draw-Tite Ball Mount # 2923 in the rise position with a 2" Ball # 63845. This will only sit 3/4" above the top of the receiver opening. It would be the closest we have to the Curt Towing Starter Kit # C45147 you found. view full answer...
Hey Doug, the # 8-213-5UC1 hub that you mentioned uses only the # 25580 inner and # LM67048 outer bearings. The # 25580 bearing has a 1.75" ID and roughly 3-1/4" OD. The # L68149 bearing has a 1.378" ID and roughly 2-3/8" OD. So, there is no way the # L68149 could be used in the place of the # 25580 bearing.
Mobile home axles usually use some oddball bearing sizes and they really are not designed to be re-used. It will likely prove very difficult to find compatible parts, so we would... view full answer...
Hey Cory, thanks for reaching out!
The Replacement Support Leg # TH33VK is for the 8-1/2" long Thule HideAway awnings which is what I believe will be a better match than the part # TH48VK you referenced, which is for a 10' long HideAway awning. Please note this is for an individual leg so if you need to 2 legs then you'll need 2 of this kit.
When I reached out to my contact at Thule he said the Crown awnings that Lippert has on their site look to be rebranded HideAway awnings so you'll... view full answer...
Hey Christoph, so worse case scenario you would have drop the tank but hopefully there's a way to maybe just loosen some of the bolts on it and maybe the lines so that they can be temporarily moved so you could install the # TLD2100.
I also attached a video on how to fishwire bolts that might be helpful depending on access. view full answer...
Hello Britt; yes as that part number is incorrect for the RT Series tracks. The nut is different on the bottom so instead the correct part is the following:
- Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP view full answer...
I understand your confusion Tom, as your LCI4.4K axles are most likely going to have the 10" Lippert Electric Trailer Brakes # LC66WD. Lippert bases their 4.4K axle on a 3,500lb axle platform while most other manufacturers base it on a larger 3" axle tube with stronger components. This is why you are seeing the 12" brake option and as RV manufacturers often change change parts on trailers based on what is available and cost this is why you will see 2 of the same trailers with different... view full answer...
Hey Molly, so the Thule fit kit part # TH145209 comes with two sets of clamps. The 104 set go on the front and the 390 go on the rear. The shorter clamps go on the front and the longer ones to the rear.
The other components needed to complete a roof rack on your 2024 Toyota Corolla are the crossbars # TH73RE and the feet part # TH79SC. view full answer...
The Replacement Cover # TX5671-CVR for the TruXedo Lo Pro Soft Roll-up Tonneau Cover 567101 will only contain the fabric. You will have to reuse your current bows and front/rear header. view full answer...
The only options we have Paul, are universal options like you already found. We have no way to see what parts Coachmen put on your Freelander 21QB or which one would fit best. You can easily measure your RV to see if the 84-1/2" # SP502L or 99-1/2" # LA-401 would be a better option. view full answer...
Hey Farook, so you'll need to pull a hub off your axle and get the bearing numbers out of them to determine what you would need as a replacement. Or you can get the axle capacity and we would be able to determine it from that. Another way is to measure the spindles where the bearings ride as well. view full answer...
To connect two propane tanks to the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator item # 888001-MBS you will want to use the GasStop Emergency Propane Shut-Off Valve Gauges w/ GasGear 18" Propane Hoses item # GS99FR. These hoses have automatic shut off valves and pressure regulators built into them. They also have a 90 degree bend that will make connecting them easier.
To purchase all of these parts in one kit you'll want the GasStop Emergency Propane Shut-Off Gauges... view full answer...
Hey there Tyler; thanks for the question and we can get the 2021 Ford Ranger set up to be flat towed behind your motorhome. In regards to the tow bar, since the Ranger weighs not even 4,500 lbs you definitely don't need to spend more money to get the 10k tow bar, a less-expensive (but just as effective) option is what I would go with. As for the brakes are you talking about your motorhome? If it's a Ford F-550 it will have hydraulic brakes and not air brakes. So all that said, here are... view full answer...
Hey Vinnie!
The Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option # 295-000183 will light up when the keys are pressed, yes. You will need to get a C123A battery as well to get the electric part of the lock to work.
The light-up feature isn't limited to the Bluetooth model part # GL55VR. view full answer...
Hey Douglas,
The Valterra Bladex RV Waste Valve Seals # T1001-9VP are slightly larger (thicker) than the LaSalle Bristol gate valve seals so you while you could get them to fit you'd likely have a leak over time. Your best bet would be to replace the gate valve with a Valterra gate valve like part # T1001VP. The old gate valve can just be unbolted from the plumbing and swapped over to the newer valve and from then on you can replace just the seals as needed. The bolt pattern for these... view full answer...
Hey John, so the Firestone Ride Rite kit part # F95FV that you referenced should fit your 2024 Ford F-350 but you need to measure the distance from the top of the jounce bumper stop to the top of the rear axle. This needs to equal 40,70, or 80 mm. I am not sure what you meant by 4:30-1.
Air Lift has their kit part # AL23DQ which does not have that dimension requirement though so that would be an option either way. view full answer...
I have no way of knowing if the parts you have are compatible with each other without knowing their individual part numbers or seeing some pictures to possibly try to identify them. If you would like to email me some part numbers or pictures I would be more then happy to answer your question. view full answer...
Hey Dal, so the Roadmaster base plate kit part # 1175-3 can be used with a Demco Commander tow bar part # DM9511012 but you will need to use the adapter part # DM9523032 with it. view full answer...
Go To Results